VSR E / TWY D8 Signage & Marking Update
|
Vehicle Service Road (VSR)
Signage & Marking Update |
|
|---|
|
| |
To help improve airfield safety, the "Stop for Aircraft" signs at the follwing Vehicle Service Road locations will be replaced with full "stop" signs.
- VSR E @ D8 (Effective Immediatly)
- VSR E @ Terminal 1 (Effective Immediatly)
- VSR C @ C7 (Comming Soon)
- VSR C @ T6 (Comming Soon)
|
|
|---|
|
VSR E @ D8
When driving on VSR E at D8, you are now required to come to a complete stop before crossing the taxiway. |
|
|
|
|
VSR E @ T1
When traveling southbound from VSR E to Terminal 1 (near Gate 18), you must come to a complete stop before crossing Taxiway D. Use caution for aircraft pushing back from G18 and for aircraft on Taxiway D.
When traveling northbound from Terminal 1 towards VSR E, ensure that you can completely cross the taxiway and that you will not impede the movement of any aircraft before entering the zipper marking. |
|
|
|
|
Yield Sign
When approaching VSR E from T1, you are no longer required to come to a complete stop. Instead you should yield to any conflicting traffic and then enter VSR E when safe to do so.
|
|
|
|
|
Comming Soon: VSR C @ C7 and the VSR crossing for VSR C @ T6 will be changed to complete stops. Also, the stop sign for vehicles entering VSR C will be changed to Yield. |
|
|
|
|
Maintaining situational awareness while driving on the airfield is extremely important. Always drive at a speed appropriate for the conditions. This speed may be significantly slower than the speed limit during periods of reduced visibility or heavy congestion. Do not use electronic devices or perform other tasks (eating, writing, etc) while driving. Be vigilant for cues of impending aircraft movement such as wing walkers, anti-collision lights, and increased aircraft engine noise. |
|
|---|
|
|
|
 |
|
|
|
|
|
